Remotes & Error Code
      Back to home
      1. Progressive Automations Knowledge Base
      2. Adjustable Standing Desks
      3. Remotes & Error Code

      HOW DO I CHANGE THE COLLISION DETECTION SENSITIVITY?

      Our standing desks have 3 settings for collision detection, and this can be set depending on your preference. To proceed, follow the steps below:

      1. Make sure that there is nothing underneath your desk as we have to enter the reset procedure.
      2. Press and hold the DOWN button until the display shows [ASr].
      3. Once [ASr] is shown, press and hold the UP [ ^ ] button and you may see three values:
        1. 10.5 = 11 lbs
        2. 10.6 = 22 lbs
        3. 10.7 =33 lbs
      4. Complete the reset procedure by holding the DOWN button until your standing desk slightly lowers and rises.